目前，建筑业发展的很迅速，高层建筑物遍布城市的各个角落，但GRC线脚通常都是用于建筑物上面的。而GRC线脚主要用于房屋装饰，这样建设的房屋看起来将会非常漂亮。但是很多人不是特别了解GRC线脚的安装步骤。接下来，跟GRC构件厂家一起来看看GRC线脚的六大步骤吧!
At present, the construction industry is developing rapidly, high-rise buildings are all over the city, but GRC pins are usually used on buildings. GRC is mainly used for house decoration, so the house will look very beautiful. But many people don't know the installation steps of GRC pins. Next, let's take a look at the six steps of GRC pins with GRC component manufacturers!
安装GRC丝脚有三种方法，即收缩螺钉固定法植入和直接焊接螺钉固定法。或者用钢架固定在墙上的grc构件焊接在钢架上。这三种方法可以用来装饰施工现场的金属线脚。
There are three ways to install GRC pins, which are contraction screw fixation, implantation and direct welding screw fixation. Or the GRC members fixed on the wall with steel frame are welded on the steel frame. These three methods can be used to decorate the metal foot of the construction site.
玻璃纤维增强复合材料线脚安装步骤：
The installation steps of glass fiber reinforced composite foot are as follows:
1、根据施工图，弹出grc构件待安装部位的定位线(中线或边线)。
1. According to the construction drawing, pop up the positioning line (middle line or side line) of the GRC component to be installed.
2、张贴grc组件时，应翻转网格布。在特殊情况下，可以不翻包直接张贴。用薄层全粘法粘贴、揉制发泡聚苯乙烯构件，使砂浆从四周溢出，粘结缝宽度不得大于3毫米，粘结缝应随粘随钩，灰缝应饱满，发泡聚苯乙烯构件表面应保持整洁。
2. When posting GRC components, you should flip the grid cloth. Under special circumstances, it can be posted directly without turning over the package. The foamed polystyrene components shall be pasted and kneaded by the thin layer full adhesion method to make the mortar overflow from all sides. The width of the bonding joint shall not be greater than 3mm. The bonding joint shall be hooked with the bonding, the mortar joint shall be full, and the surface of the foamed polystyrene components shall be kept clean.
3、GRC构件厂家对于较大的grc组件，有安装要求，需要提供临时固定的支撑。
3. GRC component manufacturers have installation requirements for larger GRC components and need to provide temporary fixed support.
4、装置如需拼接，应预先测量装配比例和视点，并在平坦处进行预装配，间隙不大于3毫米、粘结砂浆用作拼接和粘结数据。砂浆的稠度可以做得更大，并选择薄层全粘结法。拼接时，要求轻轻均匀地揉搓和锤击，使灰缝符合要求。
4. If the device needs to be spliced, the assembly proportion and viewpoint shall be measured in advance, and the pre assembly shall be carried out at the flat place, with the gap not more than 3mm, and the bonding mortar shall be used as the splicing and bonding data. The consistency of mortar can be made larger, and thin layer full bonding method is selected. When splicing, it is required to rub and hammer gently and evenly to make the mortar joint meet the requirements.
5、拼接灰缝后，使用砂浆刀勾平整合grc组件。钻孔后，如果grc部件的接缝处有多余的粘结砂浆，可以用砂纸打磨。钻孔后，grc构件拼接部位用抗裂专用胶进行加工。处理方法请参考防裂专用胶的使用说明。
5. After splicing the mortar joint, use mortar knife to level and integrate GRC components. After drilling, if there is excess bonding mortar at the joints of GRC components, sandpaper can be used for grinding. After drilling, the splicing part of GRC component is processed with special anti crack adhesive. Please refer to the instructions of the special anti cracking adhesive for treatment.
6、施工后注意成品grc构件的保护，严禁踩踏和撞击重物，如果有任何损坏，整个电动助力转向系统部件应拆除并重新组装。
6. After construction, pay attention to the protection of finished GRC components. It is strictly forbidden to step on and hit heavy objects. If there is any damage, the whole electric power steering system components should be removed and reassembled.
安装程序非常具体。我相信你已经理解了，它被广泛使用，在很多地方都能看到。此外，有才华的朋友在购买新房子后，也可以使用GRC金属线脚来装饰安装，这将使整个房子看起来特别大气。
The installation program is very specific. I believe you have understood that it is widely used and can be seen in many places. In addition, after purchasing a new house, talented friends can also use GRC metal pins to decorate and install, which will make the whole house look particularly grand.
The above describes the six steps of GRC pins, the whole process is more detailed, after the installation of GRC pins, the effect of the whole house will become more atmospheric and beautiful, if you want to install such materials when decorating the house, you can contact our website: Shandong GRC components http://www.aswjc.com 。
