玻璃钢雕塑是雕塑工艺品中的一种,具有质轻,耐腐蚀,成本相对较低的特点,以合成树脂为基体材料,以玻璃纤维及其制品为增强材料组成的复合材料。那么玻璃钢雕塑的制作流程是怎样的?
FRP sculpture is a kind of sculpture crafts. It has the characteristics of light weight, corrosion resistance and relatively low cost. It is a composite material composed of synthetic resin as the matrix material and glass fiber and its products as the reinforcing material. So what is the production process of FRP sculpture?
玻璃钢雕塑轻质高强、耐腐蚀性能好、绝缘性能好、导热率低、可设计性好、工艺性优良可以根据产品的形状、技术要求、用途及数量来灵活地选择成型工艺,工艺简单,可以一次成型。
FRP sculpture has the advantages of light weight and high strength, good corrosion resistance, good insulation performance, low thermal conductivity, good designability and excellent processability. The molding process can be flexibly selected according to the shape, technical requirements, purpose and quantity of the product. The process is simple and can be formed at one time.
经济效果突出,尤其对形状复杂、不易成型的数量少的产品,更突出它的工艺优越性。所以我们常规见到的雕塑基本上都是由玻璃钢加工制作而成。
The economic effect is outstanding, especially for the products with complex shape and small quantity that are not easy to form, its process advantages are more prominent. Therefore, the sculptures we usually see are basically made of FRP.
往往在加工前期需要业主方提供相应的图纸才能进行更为精确的加工,根据本项目的特殊性有业主方提供相应的照片进行加工,我方需要在照片的基础做出加工深化图纸以方便进一步的施工。
In the early stage of processing, the owner needs to provide corresponding drawings to carry out more accurate processing. According to the particularity of the project, the owner provides corresponding photos for processing. We need to make processing deepening drawings on the basis of photos to facilitate further construction.
图纸确认后用样稿做成我们所要的形状,在样稿做好后对照图片再进行精确的二次修改,直于图片相符。样稿制作完成后,在往样稿上涂装石膏,让其石膏内部成型。
After the drawing is confirmed, make the sample into the shape we want. After the sample is made, make accurate secondary modification against the picture until it is consistent with the picture. After the sample is made, plaster is applied to the sample to form the interior of the plaster.
石膏成型干透后,在从泡沫上摘取下来,摘取过程中必须小心翼翼,防止在摘取的过程中石膏断裂,在取下的石膏模具内部刷一遍专用胶再粘贴玻璃钢丝再刷胶反复需要三次以上。等胶与玻璃钢丝完全融合及凝固之后,敲碎石膏。
After the gypsum is completely dry, it is removed from the foam. Care must be taken during the removal process to prevent the gypsum from breaking during the removal process. It takes more than three times to brush the special glue inside the removed gypsum mold, paste the glass steel wire and brush the glue again. After the glue and glass steel wire are fully fused and solidified, break the gypsum.
山东浮雕雕塑厂家提醒大家,上一工序完结以后,立体的雕塑外表就成型了,需要用磨光片仔细打磨,在打磨过程中要认真检查每一处是否饱满,刮腻子找平。以上处理完成后,在进行整体雕塑的打磨上色。此一个成品精美的玻璃钢雕塑加工完成。
Shandong relief sculpture manufacturer reminds you that after the last process, the three-dimensional appearance of the sculpture will be formed. It needs to be polished carefully with a polishing sheet. In the grinding process, carefully check whether each part is full and scrape putty for leveling. After the above treatment, the overall sculpture shall be polished and colored. So far, a finished exquisite FRP sculpture has been processed.
The production process of FRP sculpture is the above explanation. If you don't know anything, please visit www.aswjc.com Com.