一件好的艺术作品须要多道工序独特配合制造，不锈钢雕塑的制造也是如此，那么在不同的制造阶又应当留神哪些方面的问题呢？下面
山东浮雕雕塑厂家就给大家具体介绍一下吧！
A good work of art needs to be produced through multiple processes in a unique way, as does the manufacture of stainless steel sculpture. What problems should we pay attention to at different manufacturing levels? Next, Shandong relief sculpture manufacturers will give you a detailed introduction!
不锈钢雕塑制造作为一种艺术欣赏作品，它个别重要放置在城市广场、、公园等一些公共场合，所以，在这些场合寄存的雕塑设计都一定要存在一定的意思。
As an art appreciation work, stainless steel sculpture manufacturing is placed in some public places such as city squares, shopping malls and parks. Therefore, the sculpture design deposited in these places must have a certain meaning.
成品制作前，先将所要制作的产品用特定泥巴材料塑造出相应要制作的产品，在泥塑稿制作完成后，翻制石膏外模，然后将玻璃钢（即树脂和玻璃丝布的结合物）涂刷在外模内部。等其干透后打开外模，经过合模的程序，获得玻璃钢雕塑成品。
Before the production of finished products, the products to be made shall be molded into corresponding products with specific mud materials. After the clay sculpture draft is made, the gypsum external mold shall be reproduced, and then the glass fiber reinforced plastic (i.e. the combination of resin and glass fiber cloth) shall be painted inside the external mold. After it dries thoroughly, open the external mold, and obtain the finished FRP sculpture through the mold closing procedure.
但玻璃钢雕塑在室外经过太阳的暴晒和风蚀，一般五年以上就开始有变形，脆弱易裂的缺点。铸铜雕塑工艺要比锻铜复杂，艺术创作的复原性好，因此适合成为精细作品的材料，很受艺术家的喜爱，尤其人物雕塑为常见。但其容易氧化，所以要多注意保养。
However, after being exposed to the sun and eroded by wind outside, fiberglass sculptures generally begin to deform and crack after more than five years. The cast copper sculpture process is more complex than the forged copper, and the restoration of artistic creation is good. Therefore, it is suitable to be the material for fine works and is very popular with artists, especially figure sculpture. But it is easy to oxidize, so pay more attention to maintenance.
玻璃钢雕塑设计作品以及不锈钢雕塑制造作品当初已经从室内走向了天然，走向了人群。所以长期存置于室外，不免会受到天然环境的种种破坏，而不锈钢恰好存在耐腐、抗压、牢固性较强、材质轻巧等特点，所以用它作为雕塑资料是做适合不过的了。
Glass fiber reinforced plastic sculpture design works and stainless steel sculpture manufacturing works have gone from indoor to natural and into the crowd. Therefore, if it is stored outdoors for a long time, it will inevitably be damaged by the natural environment, and stainless steel just has the characteristics of corrosion resistance, compression resistance, firmness, lightness, etc., so it is suitable for sculpture.
其次就是主题设计方面的问题了。举个例子来说，鞋子虽好，然而假如不合脚，那么它对咱们来说就不任何价值。对不锈钢雕塑制造来说切实也是一样，咱们设计雕塑作品要依据不同的地理环境、不同的场合、不同的人群综合考虑，而后以实际情况为出发点，在这个基本上再任意施展创作。因此，这也是要留神的一个方面。
The second is the theme design. For example, although shoes are good, if they don't fit well, they are of no value to us. The same is true for the manufacture of stainless steel sculpture. We should design sculpture works according to different geographical environments, different occasions and different people, and then take the actual situation as the starting point. On this basis, we can create at will. Therefore, this is also an aspect to pay attention to.
This is the end of the question that stainless steel sculpture manufacturing should pay attention to. You can come to our website if you need it http://www.aswjc.com After consulting, the relevant personnel will serve you wholeheartedly!
