山东艾赛文新材料科技有限公司更多内容敬请关注!

新闻资讯
联系我们

山东艾赛文新材料科技有限公司

联系人: 周先生

手机: 15106905678

电话: 15106905678

网址:www.aswjc.com

邮箱: 948967999@QQ.com

地址: 山东济南市天桥区无影山北路73-1号

新闻

新闻资讯

您现在的位置: 首页 > 新闻资讯

GRC构件的优势特点有哪些?

来源:http://www.aswjc.com/ 发布人:admin 发布时间:2021-09-25

优势1.可再生 、无辐射
Advantages 1. Environmental protection, renewable and radiation free
GRC构件属可再生材料,废旧的构件可以回复再利用,有利于。原材料不含有放射性核元素,为放射性核素含量A类构件材料。
GRC components are renewable materials. Waste components can be recycled, which is conducive to environmental protection. The raw materials do not contain radioactive nuclear elements and are class a environmental protection component materials with national radionuclide content.
优势2.颜色多样、造型新颖
Advantages 2. Various colors and novel shapes
GRC构件采用同质透心矿物原料,可以根据客户的需求做成各种不同颜色及不同造型的艺术效果。
GRC components are made of homogeneous transparent mineral raw materials, which can be made into artistic effects of different colors and shapes according to the needs of customers.
细数GRC构件的6大优势!
Count the 6 advantages of GRC components!
优势3.质感效果好、肌理多
Advantage 3. Good texture and texture
山东GRC构件
GRC产品表面可做成喷砂面、荔枝面、光面等不同质感效果,也可以做成条形、浮雕、镂空等不同肌理效果。
The surface of GRC products can be made into different texture effects such as sandblasting surface, litchi surface and smooth surface, as well as different texture effects such as strip, relief and hollowing out.
优势4.超薄技术、尺寸不限
Advantage 4. Ultra thin technology, unlimited size
GRC构件板薄可做到5mm,标准宽度为900mm和1200mm,长度不限,满足运输条件即可,亦可做成5mm任意厚度,任意尺寸。
The minimum thickness of GRC component plate can be 5mm, the standard width is 900mm and 1200mm, and the length is unlimited. It can meet the transportation conditions, or it can be made into 5mm to any thickness and any size.
优势5.质量更轻、强度更高
Advantage 5. Lighter weight and higher strength
GRC构件的体积密度约为1.8-1.9,8mm厚标准GRC板重量仅为15kg、抗弯强度超过34Mpa、抗压强度超过40Mpa、大大超过国际标准要求。
The bulk density of GRC members is about 1.8-1.9. The weight of 8mm thick standard GRC plate is only 15kg, the flexural strength exceeds 34mpa, and the compressive strength exceeds 40MPa, which greatly exceeds the requirements of international standards.
优势6.模具浇筑、可塑性高
Advantage 6. Mold pouring and high plasticity
GRC产品是将原料按一定配比搅拌,在模具内浇筑成型,可生产出造型丰富,质感多样的产品。可根据客户和设计师的不同需要,进行任意的艺术造型,实现设计师的设计梦想。
GRC products are produced by mixing raw materials according to a certain proportion and pouring in the mold, which can produce products with rich shapes and diverse textures. According to the different needs of customers and designers, arbitrary artistic modeling can be carried out to perfectly realize the designer's design dream.
以上就是小编为您提供的关于山东GRC构件的知识,更多的精彩内容请您继续关注我们的网站:http://www.aswjc.com
The above is the knowledge about Shandong GRC components provided by Xiaobian. For more wonderful content, please continue to pay attention to our website: http://www.aswjc.com
相关新闻
相关产品